 |
| Quantity: | |
|---|---|
· Palm Sized & Portable: Weighs just 109g (Standard) / 115g (Pro) and fits in the palm of your hand.
· All In One Charging Hub: Charge, storage mode, and adjustable current settings all in one device.
· Easy to Use: Start, stop, and adjust settings with just two buttons, guided by a clear color screen.
· Fast PD 3.0 Charging: Delivers up to 24W total (Standard) or 78W total (Pro) for rapid, efficient charging of all six ports simultaneously.
· 1.3” TFT Color Display: Clear, zoned screen shows real time voltage, current, and status for all six channels at a glance.
· Dual BT2.0 & PH2.0 Ports: Compatible with virtually all popular 1S whoop batteries.
· Smart Cooling System: Intelligent thermal management and high flow 9,000 RPM fan ensure safe and reliable charging.
· Physical Safety Design: Fool-proof ports prevent incorrect insertions.
For optimal battery health and performance, set the charging current according to the recommended values in the chart below. Do not exceed the maximum current for your battery.
Capacity | 280mAh | 320mAh | 480mAh | 580mAh | 680mAh | 1100mAh |
Recommended Current | 0.5A | 0.5A | 1A | 1A | 1.5A | 2A |
Charging Time | 33min | 35.5min | 28min | 36min | 30min | 39min |
Maximum Current | 1A | 1.5A | 2A | 2.5A | 3A | 3A |
Charging Time | 17min | 15min | 16.5min | 17min | 19min | 30min |
HexaCharger: Use a PD 3.0 adapter with at least 30W output.
HexaCharger Pro: Use a PD 3.0 adapter with 100W output or higher.
· ANKER Charger (100W)
· NOVOO RG120 3-Port 120W GaN Charger
· UGREEN Nexode 100W USB-C GaN 4-Port Charger
· AOHI The Youth PD 100W GaN 3-Port Fast Charger
· If the adapter cannot supply the requested charging current, the charger will reduce the current per port to stay within the adapter’s maximum power limit.
· If the charger detects that the adapter's output is ≤5W (5V/1A), it will charge batteries sequentially by port number, while keeping the other channels off.
· If charger can only detects the adapter's voltage but not the maximum current, power limit is unknown, * shown next to voltage. If the input voltage is below 5V, - shown next to voltage. No symbol if the adapter is providing full compatible power.
· If using a non-PD adapter, wait 5 seconds after powering on for the charger to recognize the protocol before starting to charge.
